ITExamDump선택으로Citrix 1Y0-962시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서Citrix 1Y0-962관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Citrix 1Y0-962덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
IT인증자격증을 취득하려고 마음먹었으면 끝까지 도전해봐야 합니다. Citrix인증 1Y0-350시험이 아무리 어려워도ITExamDump의Citrix인증 1Y0-350덤프가 동반해주면 시험이 쉬워지는 법은 많이 알려져 있습니다. ITExamDump의Citrix인증 1Y0-350덤프는 100% 패스보장 가능한 덤프자료입니다.한번만 믿어주시고ITExamDump제품으로 가면 시험패스는 식은 죽 먹기처럼 간단합니다.
성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. Citrix인증 1Y0-118시험이 영어로 출제되어 시험패스가 너무 어렵다 혹은 회사다니느라 공부할 시간이 없다는 등등은 모두 공부하기싫은 구실에 불과합니다. ITExamDump의 Citrix인증 1Y0-118덤프만 마련하면 실패를 성공으로 바꿀수 있는 기적을 체험할수 있습니다.제일 간단한 방법으로 가장 어려운 문제를 해결해드리는것이ITExamDump의 취지입니다.
Citrix인증사에서 주췌하는 1Y0-350시험은 IT업계에 종사하는 분이시라면 모두 패스하여 자격증을 취득하고 싶으리라 믿습니다. ITExamDump에서는 여러분이 IT인증자격증을 편하게 취득할수 있게 도와드리는 IT자격증시험대비시험자료를 제공해드리는 전문 사이트입니다. ITExamDump덤프로 자격증취득의 꿈을 이루세요.
시험 이름: CCEA XP Securing Application Deployment over the Web
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-962응시료
100% 합격율 보장
Q&A: 167 문항 1Y0-962응시료
업데이트: 2014-05-19
1Y0-962응시료: >>펼쳐보기
시험 이름: Citrix NetScaler 10 Essentials and Networking
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-350자료
100% 합격율 보장
Q&A: 126 문항 1Y0-350인증덤프
업데이트: 2014-05-19
1Y0-350자료: >>펼쳐보기
시험 이름: Citrix WinFrame 1.8 Administration
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-118자격증시험
100% 합격율 보장
Q&A: 40 문항 1Y0-118기출문제
업데이트: 2014-05-19
1Y0-118자격증시험: >>펼쳐보기
ITExamDump의 Citrix인증 1Y0-962시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Citrix인증 1Y0-962덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Citrix인증 1Y0-962시험을 통과하여 자격증을 취득하려면ITExamDump의 Citrix인증 1Y0-962덤프로 시험준비공부를 하세요.
Citrix 인증 1Y0-350시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? ITExamDump 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. ITExamDump에서 제공해드리는Citrix 인증 1Y0-350시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. Citrix 인증 1Y0-350시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.
1Y0-350 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-350.html
NO.1 Scenario: An engineer executes the following commands:
add vlan 2 bind vlan 2 -ifnum 1 / 2 add ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress
10.110.4.200 255.255.255.0
What type of IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C
Citrix IT덤프 1Y0-350자격증자료 1Y0-350 dumps
NO.2 A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
Citrix시험문제 1Y0-350시험일정 1Y0-350 IT자격증시험자료
NO.3 Scenario: The NetScaler is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP
is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication servers and time
servers are on the 10.2.10.0/ 24 network which is available through the
10.2.9.1 router. The external firewall has the 10.2.7.1 address. Traffic bound for Internet clients
should flow through the external firewall.
Which command should be used to set the default route?
A. add route 0.0.0.0 0.0.0.0 10.2.7.1
B. add route 0.0.0.0 0.0.0.0 10.2.9.1
C. add route 10.0.0.0 255.0.0.0 10.2.9.1
D. add route 10.0.0.0 255.0.0.0 10.2.7.1
Answer: A
Citrix IT시험덤프 1Y0-350시험자료 1Y0-350 1Y0-350최신덤프
NO.4 A network engineer wants to optimize a published load balanced SSL virtual server for WAN
connection with long delay, high bandwidth with minimal packet drops.
What would the network engineer use to do this type of optimization for the SSL virtual server?
A. SSL policy
B. TCP profile
C. Compression policy
D. Priority queuing policy
Answer: B
Citrix IT자격증시험자료 1Y0-350교육 1Y0-350최신덤프 1Y0-350덤프다운
NO.5 Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix자격증 1Y0-350자격증덤프 1Y0-350 Dump 1Y0-350 1Y0-350
NO.6 Scenario: A network engineer created an IPv6 virtual server on the NetScaler. The virtual
server is using a service group with two IPv4 servers bound to it. When testing access to the virtual
server from a client configured with an IPv6 address, he is unable to connect.
What could be the reason for this issue?
A. The NetScaler is disabled for NAT.
B. IPv6 protocol translation is disabled.
C. An IPv6 address on the NetScaler is not bound to the correct VLAN.
D. The NetScaler does not have an INAT rule to convert IPv4 to IPv6 from the back-end servers.
Answer: B
Citrix IT시험덤프 1Y0-350기출문제 1Y0-350 pdf
NO.7 Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces; however, the engineer has been told that the NetScaler must now only use a single
interface for this network. The engineer removes the channel and immediately notices a decrease in
network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B
Citrix최신덤프 1Y0-350시험정보 1Y0-350자격증 1Y0-350 1Y0-350최신덤프
NO.8 Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting the services are on an IPv4 network. The engineer has
already enabled IPv6 on the NetScaler.
What does the engineer need to do in order to provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
Citrix덤프 1Y0-350 Dumps 1Y0-350 IT국제자격증 1Y0-350 1Y0-350덤프
댓글 없음:
댓글 쓰기