CompTIA PD0-001인증시험이 이토록 인기가 많으니 우리ITExamDump에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, ITExamDump 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 ITExamDump선택은 정답입니다. ITExamDump선택함으로 당신이 바로 진정한IT인사입니다.
ITExamDump는CompTIA PD0-001시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의CompTIA PD0-001시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는CompTIA PD0-001시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
IT인증자격증은 여느때보다 강렬한 경쟁율을 보이고 있습니다. CompTIA 인증PD0-001시험을 통과하시면 취직 혹은 승진이나 연봉협상에 많은 도움이 되어드릴수 있습니다. CompTIA 인증PD0-001시험이 어려워서 통과할 자신이 없다구요? ITExamDump덤프만 있으면 이런 고민은 이제 그만 하지않으셔도 됩니다. ITExamDump에서 출시한 CompTIA 인증PD0-001덤프는 시장에서 가장 최신버전입니다.
우리ITExamDump 에서 여러분은 아주 간단히CompTIA PD0-001시험을 패스할 수 있습니다. 만약 처음CompTIA PD0-001시험에 도전한다면 우리의CompTIA PD0-001시험자료를 선택하여 다운받고 고부를 한다면 생가보다는 아주 쉽게CompTIA PD0-001시험을 통과할 수 있으며 무엇보다도 시험시의 자신감 충만에 많은 도움이 됩니다. 다른 자료판매사이트도 많겠지만 저희는 저희 자료에 자신이 있습니다. 우리의 시험자료는 모두 하이퀼러티한 문제와 답으로 구성되었습니다, 그리고 우리는 업데트를 아주 중요시 생각하기에 어느 사이트보다 더 최신버전을 보실 수 잇을것입니다. 우리의CompTIA PD0-001자료로 자신만만한 시험 준비하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다.CompTIA PD0-001로 빠른시일내에 자격증 취득하시고CompTIAIT업계중에 엘리트한 전문가되시기를 바랍니다.
CompTIA인증 PD0-001시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은ITExamDump 의 CompTIA인증 PD0-001덤프를 알고 계시는지요? ITExamDump 의 CompTIA인증 PD0-001덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.
시험 번호/코드: PD0-001
시험 이름: CompTIA (CompTIA PDI+ Beta Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 861 문항
업데이트: 2013-10-31
PD0-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/PD0-001.html
NO.1 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA PD0-001인증 PD0-001자격증 PD0-001 PD0-001자격증
NO.2 Scheduled preventative maintenance visits should be carried out:
A.after two unplanned service calls.
B.according to manufacturers specifications.
C.when the device is becoming unreliable.
D.every sixty days.
Answer: B
CompTIA최신덤프 PD0-001 PD0-001 PD0-001 dump PD0-001
NO.3 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA덤프 PD0-001 PD0-001 PD0-001 PD0-001기출문제
NO.4 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA덤프 PD0-001시험문제 PD0-001 PD0-001
NO.5 When arriving at the customers location, two different users describe the problem, and from their
description it seems to be two separate problems. Which of the following is an appropriate step to take?
A.Ignore both of them and decide what the real problem is.
B.Set up a separate call for each problem.
C.Have them duplicate the problem at the device.
D.Ask a third person and see if the problem is the same thing.
Answer: C
CompTIA인증 PD0-001 PD0-001인증 PD0-001 PD0-001 dumps
NO.6 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA dump PD0-001 PD0-001시험문제
NO.7 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD0-001 dump PD0-001 dump PD0-001 PD0-001 PD0-001기출문제
NO.8 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA인증 PD0-001인증 PD0-001인증
NO.9 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA dumps PD0-001 PD0-001
NO.10 Which of the following items can be used as a discharge lamp?
A.Halogen lamp
B.Light Emitting Diodes (LED)
C.Fuser lamp
D.Cleaning roller
Answer: B
CompTIA PD0-001인증 PD0-001자격증 PD0-001 PD0-001
NO.11 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA PD0-001 dump PD0-001 PD0-001 PD0-001
NO.12 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD0-001 pdf PD0-001
NO.13 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA PD0-001 PD0-001 PD0-001 pdf PD0-001 dump PD0-001기출문제
NO.14 Which of the following types of media would MOST likely cause above normal amounts of machine
jamming?
A.Envelopes
B.Colored media
C.Letterhead
D.Pre punched
Answer: A
CompTIA PD0-001 PD0-001자료
NO.15 Which of the following failed components would be responsible for the fuser unit not heating properly?
A.Halogen lamps
B.Ball bearing
C.Hot roller
D.Pressure roller
Answer: A
CompTIA시험문제 PD0-001 PD0-001 dumps
NO.16 Which of the following is the FIRST step a technician should take when troubleshooting a device
issue?
A.Gather information from the customer.
B.Isolate the problem on the device.
C.Read the service documentation for possible causes.
D.Check the parts life counters.
Answer: A
CompTIA PD0-001기출문제 PD0-001 PD0-001
NO.17 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA인증 PD0-001인증 PD0-001 dumps PD0-001 pdf PD0-001시험문제
NO.18 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA PD0-001자료 PD0-001 dump
NO.19 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA PD0-001 PD0-001기출문제 PD0-001 PD0-001
NO.20 Which of the following type of lamp is used for heating a fuser?
A.Xenon
B.Halogen
C.Incandescent
D.Light Emitting Diode
Answer: B
CompTIA PD0-001 PD0-001자료
NO.21 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA기출문제 PD0-001 pdf PD0-001 dumps PD0-001
NO.22 When onsite repairing a printer the technicians cell phone rings and it is a personal call, how should
the technician handle this?
A.Answer the call and talk to your friend at the customer site.
B.Answer the call and tell the friend you will call them later.
C.Let it go to voicemail, call them back between service calls.
D.Let it ring and call the friend back when the customer leaves.
Answer: C
CompTIA시험문제 PD0-001 PD0-001자료 PD0-001덤프
NO.23 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA PD0-001 PD0-001시험문제 PD0-001 pdf PD0-001 dump
NO.24 How should a service representative provide closure at the end of a call for a client?
A.Explain the issues of the call, the steps taken to resolve them and query the client if they have any
additional needs.
B.Explain the solution to the issue and then provide the client with the technicians contact information in
case they have any questions.
C.Give the client a technical explanation on the issue and how it was fixed; throw any faulty equipment in
the clients garbage.
D.Proceed to the next service call, check back with the client in a week to see if they have any additional
needs.
Answer: A
CompTIA기출문제 PD0-001 PD0-001
NO.25 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA dumps PD0-001 PD0-001
NO.26 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA PD0-001 PD0-001자료 PD0-001 dumps PD0-001 PD0-001
NO.27 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA dumps PD0-001 PD0-001 PD0-001 PD0-001인증
NO.28 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA최신덤프 PD0-001 dumps PD0-001 PD0-001자료 PD0-001
NO.29 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA덤프 PD0-001자격증 PD0-001시험문제
NO.30 Which of the following devices can route electrical signals only when activated by an external control
signal?
A.Solenoid
B.Relay
C.Clutch
D.Capacitor
Answer: B
CompTIA자격증 PD0-001최신덤프 PD0-001시험문제 PD0-001자격증 PD0-001
ITexamdump의 000-318덤프의 VCE테스트프로그램과 MB2-866덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 FCNSA.v5시험에 대비한 고품질 덤프와 HP2-N42시험 최신버전덤프를 제공해드립니다. 최고품질 NS0-156시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기