2013년 9월 23일 월요일

Hitachi 인증 HH0-220 덤프

ITExamDump는 여러분이 빠른 시일 내에Hitachi HH0-220인증시험을 효과적으로 터득할 수 있는 사이트입니다.Hitachi HH0-220인증 자격증은 일상생활에 많은 개변을 가져올 수 있는 시험입니다.Hitachi HH0-220인증 자격증을 소지한 자들은 당연히 없는 자들보다 연봉이 더 높을 거고 승진기회도 많아지며 IT업계에서의 발전도 무궁무진합니다.

ITExamDump의 덤프선택으로Hitachi HH0-220인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.

Hitachi인증 HH0-220시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Hitachi인증 HH0-220덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. Hitachi 인증HH0-220시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Hitachi 인증HH0-220시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.

시험 번호/코드: HH0-220
시험 이름: Hitachi (HDS Certified Implmenter-Modular)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 109 문항
업데이트: 2013-09-22

인재도 많고 경쟁도 치열한 이 사회에서 IT업계 인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지켜야만 합니다.우리 ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다. Hitachi 인증HH0-220인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의Hitachi 인증HH0-220로 시험을 한방에 정복하세요.

HH0-220 덤프무료샘플다운로드하기: http://www.itexamdump.com/HH0-220.html

NO.1 How should the Hitachi Unified Storage systems dual power supplies be connected?
A. by FS6 circuits breakers
B. only one should be connected, the other being standby
C. by adjacent sockets on a single power distribution unit
D. by two independent and appropriately rated power distribution units
Answer: D

Hitachi   HH0-220   HH0-220인증

NO.2 You want to configure SNMP on a Hitachi Unified Storage system. The license key is already installed
and enabled. What are two key steps when configuring SNMP? (Choose two.)
A. Import the MIB file into the HUS.
B. Install an SNMP Manager on the HUS.
C. Create the SNMP environment file in the HUS.
D. Register the SNMP configuration files in the HUS.
Answer: C,D

Hitachi최신덤프   HH0-220 dumps   HH0-220   HH0-220   HH0-220

NO.3 You are upgrading a Hitachi Unified Storage (HUS) system with the File Module option. Which
combination is required to support this upgrade?
A. FC connectivity between the HUS and the File Module plus the Hitachi BOS F software bundle
B. 10GbE connectivity between the HUS and the File Module plus the Hitachi BOS M software bundle
C. FCoE connectivity between the HUS and the File Module plus the Hitachi BOS F software bundle
D. FC connectivity between the HUS and the File Module plus the Hitachi BOS N software bundle
Answer: A

Hitachi   HH0-220 pdf   HH0-220 dumps   HH0-220   HH0-220   HH0-220 pdf

NO.4 A customer has a Hitachi Unified Storage (HUS) system model 110 configured with iSCSI I/O interface
boards. They now want to connect it to a FC-SAN and have purchased the FC-Option upgrade to do so.
Which two tasks must be performed on the HUS system? (Choose two.)
A. Set the HUS FC port topology as Fabric.
B. Set the HUS FC port topology as Point-to-Point.
C. Install and enable the FC-Option on the HUS.
D. Install and enable the FC Expansion Board.
Answer: B,C

Hitachi dumps   HH0-220 dumps   HH0-220

NO.5 You have been asked to allocate storage from a Hitachi Unified Storage system to a cluster of AIX
hosts. The application owner wants you to make sure that the queue depth is set to 16 for all the LUNs.
Where do you define the queue depth?
A. on each LUN
B. on the server HBAs
C. on the WWNN Target Ports
D. on the WWPN Target Ports
Answer: A

Hitachi자료   HH0-220   HH0-220 pdf

NO.6 When implementing host access security for a LUN in a Hitachi Unified Storage system, to what is the
host WWN applied?
A. Host Group
B. Storage Group
C. Domain Group
D. Link Group
Answer: A

Hitachi자료   HH0-220   HH0-220   HH0-220

NO.7 What is Hitachi Data System's recommended practice for zoning?
A. port-based zoning
B. zoning is optional
C. single HBA zoning (one HBA per zone)
D. single operation system zoning (all HBAs from one OS in a zone)
Answer: C

Hitachi인증   HH0-220   HH0-220   HH0-220

NO.8 What are two effects of persistent binding? (Choose two.)
A. Persistent binding can speed up path failover.
B. Persistent binding guarantees Command Device security.
C. Persistent binding can speed up the server boot process.
D. Persistent binding guarantees that target assignments are preserved between reboots.
Answer: C,D

Hitachi dump   HH0-220   HH0-220   HH0-220   HH0-220

NO.9 A customer has identified a performance bottleneck with Online Transaction Processing (OLTP)
production host LUNs. The performance improvement plan includes a change to the Hitachi Dynamic Link
Manager load balancing algorithm which is currently set to Round Robin. Which setting would you
recommend?
A. Least I/Os
B. Least blocks
C. Extended Round Robin
D. Extended Least blocks
Answer: A

Hitachi   HH0-220   HH0-220덤프   HH0-220기출문제   HH0-220시험문제

NO.10 You have just allocated four 3TB LUNs from a Hitachi Unified Storage System to a set of ESX 4.x
servers. The VMware administrator can see volumes that are assigned to the servers from an older
storage array, but not the volumes you have just allocated. What is the most likely cause?
A. The FC switch ports need to be disabled/enabled to force the HBAs to re-login to the fabric.
B. This a newer storage array with an older version of ESX so the HBA drivers need to be updated.
C. ESX 4.x servers cannot recognize volumes that are 2TB or larger.
D. The rescan function in VMware is not working, so both servers need to be rebooted.
Answer: C

Hitachi   HH0-220기출문제   HH0-220자격증   HH0-220

NO.11 What needs to be replaced in case of a local memory DIMM failure on a Hitachi Unified Storage
controller?
A. the controller
B. the local memory DIMM
C. the controller and the local memory DIMM
D. the controller, the local memory DIMM and the cache DIMMs
Answer: C

Hitachi dump   HH0-220   HH0-220   HH0-220

NO.12 What are three characteristics of the Hitachi Unified Storage systems active/active controller design?
(Choose three.)
A. SNM2 GUI is used to turn on active/active controller processing.
B. Workload is automatically balanced between controllers.
C. When creating a LUN the default controller must be selected.
D. The processor of Ctlr0 can access the Fibre Channel (FC) ports of Ctrl1.
E. Non disruptive firmware upgrade is possible even if a host is connected by only one path.
Answer: B,D,E

Hitachi자격증   HH0-220   HH0-220 dump   HH0-220

NO.13 A customer will be implementing a Hitachi Unified Storage File Module two-node NAS cluster with one
SMU. How many power connections are necessary?
A. 3
B. 4
C. 5
D. 6
Answer: C

Hitachi dumps   HH0-220   HH0-220   HH0-220

NO.14 A customer wants to migrate data between two Hitachi Unified Storage systems using TrueCopy. What
are two requirements? (Choose two.)
A. The DM-LU must be greater than 10GB.
B. There must be FC connectivity between the arrays.
C. The P-Vol and S-Vol size must be equal.
D. A Command Device must be created.
Answer: A,C

Hitachi자료   HH0-220   HH0-220 pdf   HH0-220   HH0-220자료   HH0-220

NO.15 A Hitachi Unified Storage system is connected to a Solaris server. If you want to optimize performance
for the host I/Os, how do you determine the appropriate queue depth value?
A. Set queue depth to 1.
B. Use the operating system default value.
C. The value is set according to the results of the initial SCSI inquiry.
D. Using the Host installation guide for Fibre Channel.
Answer: D

Hitachi자료   HH0-220   HH0-220인증

NO.16 Which two operations can be performed with the Web utility on a Hitachi Unified Storage system?
(Choose two.)
A. Take a simple trace.
B. Install license keys.
C. Perform an online microcode update.
D. Perform an offline microcode update.
Answer: A,D

Hitachi   HH0-220최신덤프   HH0-220   HH0-220덤프

NO.17 You are implementing a Hitachi Unified Storage File Module cluster with a single SMU. How do you run
the smu-config script?
A. Connect an Ethernet cable and login as supervisor.
B. Connect a serial null-modem cable and login as supervisor.
C. Connect an Ethernet cable and login as root.
D. Connect a serial null-modem cable and login as root.
Answer: D

Hitachi   HH0-220   HH0-220

NO.18 A customer wants to create a multi-path environment for a specific Redhat Linux application on a
Hitachi Unified Storage system. They have created Host Groups on all of the available ports and mapped
the logical units accordingly. Which two multi-pathing options can be used for active/active connectivity?
(Choose two.)
A. Device Mapper
B. Multipath I/O (MPIO)
C. Hitachi Dynamic Link Manager
D. Multiplexed I/O (MPxIO)
Answer: A,C

Hitachi   HH0-220   HH0-220   HH0-220시험문제   HH0-220

NO.19 What are two ways to register a new Hitachi Unified Storage system with Storage Navigator Modular 2?
(Choose two.)
A. SNM2 can scan a range of IP addresses.
B. SNM2 can import a .CSV file containing IP addresses.
C. The controller IP addresses can be entered into SNM2.
D. SNM2 automatically detects connected arrays using UDP broadcasts.
Answer: A,C

Hitachi   HH0-220최신덤프   HH0-220최신덤프

NO.20 A customer wants to start using ShadowImage on several of their existing Hitachi Unified Storage
systems. They would like a solution to centrally configure their Point-in-Time copies. Which product would
you recommend?
A. Hitachi Dynamic Replicator
B. Hitachi Universal Replicator
C. Business Continuity Manager
D. Hitachi Replication Manager
Answer: D

Hitachi   HH0-220   HH0-220 dump   HH0-220

ITexamdump의 700-101덤프의 VCE테스트프로그램과 200-120덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 SY0-301시험에 대비한 고품질 덤프와 HP3-C33시험 최신버전덤프를 제공해드립니다. 최고품질 100-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HH0-220.html

댓글 없음:

댓글 쓰기