인재도 많고 경쟁도 치열한 이 사회에서 IT업계 인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지켜야만 합니다.우리 ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다. Microsoft 인증070-291인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의Microsoft 인증070-291로 시험을 한방에 정복하세요.
ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 Microsoft인증070-291시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 Microsoft인증070-291덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
시험 번호/코드: 070-291
시험 이름: Microsoft (Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 260 문항
업데이트: 2013-12-18
ITExamDump 에서 제공해드리는 Microsoft인증070-291시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Microsoft인증070-291시험은ITExamDump 표Microsoft인증070-291덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.
우리ITExamDump에는 아주 엘리트한 전문가들로 구성된 팀입니다. 우리는 아주 정확하게 또한 아주 신속히Microsoft 070-291관한 자료를 제공하며, 업데이트될경우 또한 아주 빠르게 뉴버전을 여러분한테 보내드립니다. ITExamDump는 관련업계에서도 우리만의 브랜드이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. 현재Microsoft 070-291인증시험패스는 아주 어렵습니다, 하지만 ITExamDump의 자료로 충분히 시험 패스할 수 있습니다.
ITExamDump의 도움을 받겠다고 하면 우리는 무조건 최선을 다하여 한번에 패스하도록 도와드릴 것입니다. 또한 일년무료 업뎃서비스를 제공합니다. 중요한 건 덤프가 갱신이 되면 또 갱신버전도 여러분 메일로 보내드립니다. 망설이지 마십시오. 우리를 선택하는 동시에 여러분은070-291시험고민을 하시지 않으셔도 됩니다.빨리 우리덤프를 장바구니에 넣으시죠.
여러분이 다른 사이트에서도Microsoft인증070-291시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.우리덤프의 문제와 답으로 여러분은 꼭 한번에Microsoft인증070-291시험을 패스하실 수 있습니다.
ITExamDump의Microsoft 070-291인증시험의 자료 메뉴에는Microsoft 070-291인증시험실기와Microsoft 070-291인증시험 문제집으로 나누어져 있습니다.우리 사이트에서 관련된 학습가이드를 만나보실 수 있습니다. 우리 ITExamDump의Microsoft 070-291인증시험자료를 자세히 보시면 제일 알맞고 보장도가 높으며 또한 제일 전면적인 것을 느끼게 될 것입니다.
070-291 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-291.html
NO.1 You are a network administrator for A.Datum Corporation.The network consists of a single Active
Directory domain named adatum.net.
Users regularly browse the internal network and the Internet from their client computers.All Web and
e-mail hosting for a separate DNS domain named adatum.com is outsourced to an ISP.All name
resolution requests for adatum.com are resolved by the ISP.You have no administrative control over the
DNS servers at the ISP.You
cannot list the contents of adatum.com by using the nslookup command on the DNS servers at the ISP.
A Windows Server 2003 computer named Server1 is configured with a primary zone for adatum.net.All
root hints have been removed from Server1. All client computers refer to this DNS server for name
resolution.
You need to configure DNS resolution to ensure that all client computers can locate and access resources
in adatum.net, adatum.com, and the Internet.
What should you do?
A.Configure a secondary zone for adatum.com on Server1.
B.Configure a primary zone for adatum.com on Server1.
C.Configure conditional forwarding for adatum.com with the IP address of the DNS server at the ISP.
D.Configure simple forwarding with the default settings with the IP address of the DNS server at the ISP.
Answer: D
Microsoft기출문제 070-291 070-291자격증 070-291 070-291시험문제
NO.2 You are the administrator of a Windows Server 2003 computer named Server1. Server1 is a domain
member server that has the DNS service installed.
Server1 is configured with two network interfaces named NIC1 and NIC2. Routing is not enabled between
the two network interfaces.NIC1 and NIC2 are configured as shown in the following table.
Resources on the preproduction network segment use the same fully qualified domain names (FQDNs)
as resources in the production network.The TCP/IP properties on client computers in the preproduction
environment are controlled by individual testers.
You need to ensure that the users in the preproduction environment cannot resolve FQDNs from the
production network.You want to accomplish this goal by using the DNS console on Server1.
What should you do?
A.Configure the interfaces properties on Server1 to listen on 192.168.2.10 only.
B.Configure the forwarders on Server1 to refer requests to 192.168.3.2.
C.Configure Server1 to disable recursion.
D.Configure Server1 to disable round robin.
Answer: A
Microsoft 070-291 070-291 070-291
NO.3 Drag and Drop
You are the network administrator for Contoso, Ltd.The network consists of a single Active Directory
forest.The
forest contains two domains named contoso.com and corp.contoso.com.The functional level of the forest
and the two domains is Windows Server 2003.
The corp.contoso.com zone is configured as an Active Directory-integrated zone.The corp.contoso.com
zone is also configured to replicate to all domain controllers in the domain.
The servers are configured as shown in the following table.
You plan to remove Server1 from the network.You need to install DNS to host the corp.contoso.com
zone.Your solution must be fault-tolerant.
On which server or servers should you install DNS?
To answer, drag the DNS service to the correct server or servers in the work area.
Answer:
NO.4 You are the network administrator for your company.The network consists of a single Active Directory
domain.
The domain contains an organizational unit (OU) named Webservers.The Webservers OU contains the
computer accounts of 12 Windows Server 2003 computers that function as intranet Web servers.A Group
Policy object (GPO) named WebserversPolicy is linked to the Webservers OU.The GPO is used to
configure various settings on
the computers in the OU.A global group named WebserverAdmins is a member of the Administrators local
group on each intranet Web server.
You plan to install a security scanning application on each intranet Web server.The documentation for the
application states that it uses a service account, which must be able to modify the
HKEY_LOCAL_MACHINE\SYSTEM key in the registry of every computer on which the application is
installed.
You create the service account in the domain.The company's written security policy states that service
accounts must be assigned only the minimum rights and permissions that they require to function.
You need to configure the intranet Web servers so that they comply with the installation requirements of
the security scanning application.You also need to comply with the company's security policy.You want to
achieve this goal by using the minimum amount of administrative effort.
What should you do?
A.Add the service account to the WebserverAdmins global group.
B.Configure the required permissions as registry security settings in the WebserversPolicy GPO.
C.Run the regedit.exe command to add the required permissions to the registry of each intranet Web
server.
D.Run the explorer.exe command to modify NTFS permissions on the
Systemroot\System32\Config\System
file.Assign the service account the Allow - Change permission.
E.Configure file system security settings in the WebserversPolicy GPO to modify NTFS permissions on
the
Systemroot\System32\Config\System file.Assign the service account the Allow - Change permission.
Answer: D
Microsoft인증 070-291 070-291 070-291자료
NO.5 You are the network administrator for your company.The network consists of a single subnet.A
Windows
Server 2003 computer named Server1 functions as a DHCP server.
Server1 leases IP addresses in the 10.1.1.0/24 range to desktop client computers.There are 12 client
reservations for other servers and network printers.You have configured several detailed scope and
server options. If Server1 fails, you want to have a contingency plan that will allow you to use a domain
controller named DC2 as a DHCP server as quickly as possible.You install DHCP on DC2 without any
configuration and stop the DHCP
Server service.
You want to list the tasks that are required to back up Server1 and the tasks that are required to restore
the backup to DC2. A backup age of 24 hours or less is acceptable.
If Server1 fails, which set of tasks is required to enable DC2 to replace Server1 as the DHCP server?
A.On Server1: Schedule the Backup utility to back up the System State data to tape every 24 hours.
On DC2: Perform a non-authoritative System State restore.Using the Services console, start the DHCP
Server
service.Authorize DHCP.Reconcile the database.
B.On Server1: Use the Backup utility to schedule a tape backup of the DHCP database every 24 hours.
On DC2: Restore the tape backup of the DHCP database to a folder.Using the DHCP console, restore the
backup from the same folder.From the command prompt, type net start dhcpserver.Authorize DHCP.
C.On Server1: Schedule the Backup utility to back up the System State data to tape every 24 hours.
On DC2: Perform an authoritative System State restore.Manually re-create the server and scope options
that were on Server1. From a command prompt, type net start dhcpserver.Authorize DHCP.
D.On Server1: Use the DHCP console to perform a DHCP backup every 24 hours.Copy the backup on a
network share that is accessible by DC2.
On DC2: Copy the backup to a local folder.Using the DHCP console, restore the backup from the local
folder.From a command line, type net start dhcp.Authorize DHCP.Re-create the 12 client reservations.
Answer: B
Microsoft시험문제 070-291자격증 070-291시험문제 070-291 pdf 070-291 070-291인증
NO.6 131.107.11.0/23
NO.7 You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003. All client computers run Windows XP Professional.
You need to implement a new software update infrastructure.You discover that security patches, critical
updates, and service packs have never been installed on any client computer on the network.
You install Windows Server Update Services (WSUS) on a Windows Server 2003 computer named
Server5. You synchronize and approve all of the current security patches, critical updates, and service
packs.
You need to ensure that all client computers receive all Microsoft security patches, critical updates, and
service packs.
Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)
A.Open the WSUS console.Select the option to automatically approve WSUS updates.
B.Install the Automatic Updates client on all client computers.
C.Modify the Microsoft Update settings of the Default Domain Controller organizational unit (OU) Group
Policy object (GPO) to point client computers to http ://server5.
D.Modify the Microsoft Update settings of the Default Domain Policy Group Policy object (GPO) to point
client computers to http: //server5.
E.Open the WSUS console.Create a target group and assign all client computers to the group.
Answer: B D
Microsoft시험문제 070-291최신덤프 070-291자격증 070-291 070-291 070-291
NO.8 You are a network administrator for Alpine Ski House.The network consists of a single Active Directory
domain named alpineskihouse.com.
Your company acquires a company named Adventure Works.The Adventure Works network consists of a
single
Active Directory domain named adventure-works.com.
A server named Server32 is a network-management application server in the adventure-works.com
domain.Server32 accesses all of the desktop client computers to perform automated software upgrades
and hardware inventory.The network-management software on Server32 references desktop computers
by unqualified
host names, which are resolved to clientname.adventure-works.com by using a DNS server.
You join Server32 to your domain to become server32.alpineskihouse.com.The Server32 IP address is
10.10.10.90.
You are gradually migrating all adventure-works.com desktop client computers to your domain to become
clientname.alpineskihouse.com.You do not have access to the adventure-works.com DNS server.When
Server32 attempts to apply an update to the client computers, the network-management software returns
many alerts that say that desktop computers cannot be found.
You want to allow the network-management software on Server32 to resolve unqualified client computer
host
ames in adventure-works.com or alpineskihouse.com, and you want to use the minimum amount of
administrative effort.
What should you do?
A.On the DNS server for alpineskihouse.com, add a zone for adventure-works.com.Create a host (A)
record for server32.adventure-works.com that points to 10.10.10.90.
B.On Server32, in System Properties, type adventure-works.com in the Primary DNS suffix of this
computer field in the DNS Suffix and Netbios Computer Name setting.
C.On Server32, configure a Hosts file that contains the name and IP address of every network computer.
D.On Server32, in Advanced TCP/IP Settings, add adventure-works.com and alpineskihouse.com to the
Append these DNS suffixes (in order) setting.
Answer: D
Microsoft pdf 070-291 070-291기출문제 070-291인증 070-291
NO.9 You are the network administrator for your company.The network contains a Windows Server 2003
computer named Server1.
Three administrators are members of the Administrators local group on Server1. Twelve other
administrators are members of the Domain Admins group.The Domain Admins group is also a member of
the Administrators local group on Server1.
Someone makes an unauthorized change to the HKEY_LOCAL_MACHINE\SYSTEM key in the registry
on
Server1, which causes the computer to fail.You fix the problem.
You need to log all attempts to access the HKEY_LOCAL_MACHINE\SYSTEM key in the registry on
Server1.
You decide to enable auditing in the local security policy on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)
A.Enable auditing in the local security policy on Server1. Select the Audit object access (success and
failure) option in the audit policy.
B.Enable auditing in the local security policy on Server1. Select the Audit privilege use (success and
failure) option in the audit policy.
C.Enable auditing in the local security policy on Server1. Select the Audit system events (success and
failure) option in the audit policy.
D.Configure the SACL on the HKEY_LOCAL_MACHINE\SYSTEM key in the registry.Specify auditing of
the Full Control permission for Everyone.
E.Configure the SACL on the HKEY_LOCAL_MACHINE\SYSTEM key in the registry.Specify auditing of
the Set Value permission for Everyone.
Answer: D A
Microsoft 070-291 070-291덤프
NO.10 Drag and Drop
You are a network administrator for the Graphic Design Institute.The network contains five Windows
Server 2003 computers that also function as DNS servers.The servers are configured as shown in the
work area.
The Lagos and Nairobi branches of the school each have five Windows XP Professional client
computers.The
Tangier branch has 5,000 Windows XP Professional client computers, and the Cape Town branch has
2,500
Windows XP Professional client computers.
Server1 is located in the school's main office in Cairo.Server1 is the authoritative server for a zone named
TestInside.com.No changes are planned for the name server (NS) resource records for TestInside.com.
The DNS servers in the Nairobi and Lagos branches are multiuse servers that are configured with the
minimum hardware necessary to run Windows Server 2003. The DNS servers in the Cape Town and
Tangier branches are configured as dedicated servers with hardware that is sufficient to sustain multiple
DNS zones.
You need to ensure that the following requirements are met:
Each client computer can resolve names on the network as quickly as possible by using a fully qualified
domain name (FQDN).
Prevent zone replication traffic from occurring on the slow network connections.
Minimize hard disk utilization on the DNS servers in the Lagos and Nairobi branches as much as possible.
Ensure that DNS queries in Tangier and Cape Town are resolved locally.
How should you configure the remote DNS servers?
To answer, drag the appropriate server configuration to the correct server or servers in the work area.
Answer:
NO.11 You are the network administrator for your company.The network consists of a single Active Directory
domain.The domain contains 35 Windows Server 2003 computers; 3,000 Windows XP Professional
computers; and 2,000 Windows 2000 Professional computers.
Windows Server Update Services (WSUS) is installed on a server named Server1. The necessary Group
Policy object (GPO) is configured.
You need to confirm whether all computers in the domain have received all approved updates from
Server1.
What should you do on Server1?
A.Install and configure Urlscan.exe.
B.At the command prompt, type gpresult /scope COMPUTER.
C.Open the WSUS console.Run the Status of Computers report.
D.Open the WSUS console.Run the Synchronization Results report.
Answer: C
Microsoft 070-291 070-291
NO.12 131.107.11.0/24
NO.13 Drag drop
You are the network administrator for a Web hosting company.All servers run Windows Server 2003. All
client computers run Windows XP Professional.
Your company is assigned the following IP address ranges by the ISP:
>131.107.10.0 through 131.107.10.255
>131.107.11.0 through 131.107.11.255
The company's data center contains 400 Windows Server 2003 computers and consists of two subnets
named subnet A and subnet B.Subnet A contains 200 servers and uses the 131.107.10.0 network
address.Subnet B also contains 200 servers and uses the 131.107.11.0 network address.All server IP
addresses are assigned by DHCP.All computers in the data center have valid Internet-accessible IP
addresses.
As a result of a corporate acquisition, 200 additional servers will be added to your company's data center
within one month.The new servers will be placed on the network segment that maps to subnet A.The
existing router does not have the capacity for an additional subnet, and the budget does not allow the
purchase of a new router.You will
need to add the additional servers to the existing subnet A.The ISP assigns you the additional IP address
range 131.107.12.0 through 131.107.12.255.
You need to change the IP addressing scheme to accommodate all required servers in subnet A and
subnet B.You are authorized to make any necessary changes.
The diagram in the work area shows the network configuration and the planned number of servers for
each subnet.
Which IP address should be assigned to each subnet?
To answer, drag the appropriate IP address or addresses to the correct locations in the work area.
IP address IP Addresses
1> 131.107.10.0/23
NO.14 Active Screen
You are the network administrator for your company.The network consists of a single Active Directory
domain.The relevant portion of the network is shown in the exhibit.(Click the Exhibit button.)
You need to configure a server named Server1 to use a valid static IP configuration.You need to enable
Server1 to
communicate with all hosts on the network and on the Internet.You want Server1 to query the DNS server
on the local subnet for name resolution.You also want to configure redundancy for name resolution.
What should you do?
To answer, configure the correct options in the dialog box.Drag the appropriate IP address or addresses
and the appropriate subnet mask or masks to the appropriate location or locations in the dialog box.
Answer:
NO.15 131.107.10.0/24
NO.16 You are the network administrator for your company.The network consists of a single Active Directory
domain.The functional level of the domain is Windows Server 2003. All client computers in the domain run
Windows XP Professional.
An application named Inventory.exe is installed on all computers in the domain to remotely gather
software inventory information.The application runs as a service in the security context of the Local
System.The startup type of the service is set to Automatic.
In the Default Domain Policy Group Policy object (GPO), the security administrator has configured a
software restriction policy that is applied to all computers in the domain.The policy contains a hash rule for
the
Inventory.exe application, and the hash rule is configured with a security level of Unrestricted.
The client computers on the network are attacked by a worm that is distributed by e-mail messages
received over the Internet.The worm detects the presence of Inventory.exe on a computer, then starts a
new instance of the application in the security context of the logged-on user.The worm exploits a bug in
the application to cause the
computer to fail.
You need to ensure that Inventory.exe cannot be started by the worm, while still allowing the application to
run as a service.
What should you do?
A.In the computer settings section of the Default Domain Policy GPO, configure a software restriction
policy that contains a zone rule for the Internet zone.Configure the zone rule with a security level of
Disallowed.
B.In the user settings section of the Default Domain Policy GPO, configure a software restriction policy
that contains a zone rule for the Internet zone.Configure the zone rule with a security level of Disallowed.
C.In the user settings section of the Default Domain Policy GPO, configure a software restriction policy
that
contains a hash rule for the Inventory.exe application.Configure the hash rule with a security level of
Disallowed.
D.In the computer settings section of the Default Domain Policy GPO, modify the existing software
restriction policy hash rule for the Inventory.exe application so that the hash rule has a security level of
Disallowed.
Answer: D
Microsoft인증 070-291 070-291 070-291 070-291인증
NO.17 131.107.12.0/24
Answer
:
2.You are the network administrator for your company.All servers run Windows Server 2003. All servers
are configured with static IP addresses.All client computers run Windows XP Professional.All client
computers are configured as DHCP clients.
The company has a main office and one branch office.The offices are separated by a router.A DHCP
server is deployed in each office.
One of the DHCP servers shuts down unexpectedly.It takes four hours to repair the server.During that
time, several mobile users connect their portable computers to the network and report that they cannot
connect to shared resources on the network.
After the server is repaired, you create a new scope on each DHCP server that includes IP addresses for
the other office.You activate the scopes.
You test the new DHCP configuration by shutting down the DHCP server in the main office.You find out
that the client computers in the main office are not receiving IP addresses from the DHCP server in the
branch office. You need to ensure that when the DHCP server in one office fails, the client computers will
receive a correct IP
address configuration from the DHCP server in the other office.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Configure the router between the offices to forward BOOTP broadcasts.
B.Configure the DHCP server in each office with a DHCP scope that includes the same IP addresses as
the DHCP server in the other office.Activate the scope.
C.Configure the DHCP server in each office with an additional network adapter.Connect each new
network adapter to the local network.Assign an IP address from the other office's network to each new
network adapter.
D.Install and configure a DHCP relay agent in each office.
Answer: DA
Microsoft 070-291 070-291 070-291자료
3.You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The network contains a Web server named Server1 that runs IIS 6.0 and hosts a secure Web site.The
Web site is accessible from the intranet, as well as from the Internet.All users must authenticate when
they connect to Server1.
All users on the Internet must use a secure protocol to connect to the Web site.Users on the intranet do
not need to use a secure protocol.
You need verify that all users are using a secure protocol to connect to Server1 from the Internet.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Monitor the events in the application log on Server1.
B.Monitor the events in the security log on Server1.
C.Monitor the Web server connections on Server1 by using a performance log.
D.Monitor network traffic to Server1 by using Network Monitor.
E.Monitor the IIS logs on Server1.
Answer: ED
Microsoft자료 070-291 070-291최신덤프 070-291
4.You are the administrator of an Active Directory domain.All servers run Windows Server 2003. All client
computers run Windows XP Professional.All computers are members of the domain.
The Secure Server (Require Security) IPSec policy is assigned to a file server named Server6. The policy
is configured as shown in the exhibit.(Click the Exhibit button.)
Users report that they cannot access shared folders on Server6. Users were able to access shared
folders on
Server6 prior to the implementation of the IPSec policy.
You need to ensure that all client computers in the domain can access the shared folders on Server6. You
must ensure that all communications between client computers and Server6 be encrypted.
What should you do?
A.On Server6, enable the All ICMP Traffic IP Security rule in the properties of the Secure Server (Require
Security) IPSec policy.
B.On Server6, enable the <Dynamic> IP Security rule in the properties of the Secure Server (Require
Security)
IPSec policy.
C.On all client computers, assign the Client (Respond Only) IPSec policy.
D.On all client computers, install an IPSec communication certificate in the local machine store.
Answer: C
Microsoft 070-291 dumps 070-291 070-291 070-291덤프 070-291최신덤프
5.You are a network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The company has a main office and one branch office.The perimeter networks for each office are
configured as shown in the exhibit.(Click the Exhibit button.)
You configure an L2TP/IPSec VPN tunnel between Server1 and Server2. You also configure and assign
an IPSec
policy named RASIPSec that requires secure communications.
You need to ensure that no unsecured traffic from the Internet reaches the internal network through this
VPN.You
also need to ensure that access to the VPN servers from their respective internal networks is not
disrupted. What should you do?
A.Configure input and output L2TP/IPSec packet filters on the internal interfaces of Server1 and Server2.
B.Configure input and output L2TP/IPSec packet filters on the external interfaces of Server1 and Server2.
C.In the properties of RASIPSec, edit the All IP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
D.In the properties of RASIPSec, edit the All ICMP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
Answer: B
Microsoft기출문제 070-291인증 070-291시험문제 070-291최신덤프
6.You are the administrator of an Active Directory domain.The network contains a Windows Server 2003
domain controller named Server1.
Users report that they experience intermittent delays when they log on to Server1. Administrators report
that replication attempts between Server1 and other domain controllers are occasionally delayed.
You need to verify the cause of the intermittent connection delays to Server1. You also need to find out
whether the problem is related to a hardware deficiency on Server1. You need to track these delays over
a period of one day.
What should you do first?
A.Run the netdiag /verbose command to perform a network diagnostic test on Server1.
B.Run the replmon command to view the Active Directory replication status on Server1.
C.Use Network Monitor to view the network traffic packet contents between Server1 and all other
computers.
D.Create a System Monitor counter to track the queue lengths on the network adapter on Server1.
Answer: D
Microsoft 070-291자격증 070-291 070-291
NO.18 You are the administrator of a Windows Server 2003 computer named Server1. Server1 has a
third-party application installed on it.The third-party application runs as a service that is named Service1.
Service1 fails periodically.
You need to configure the recovery options for Service1 to meet the following requirements:
If Service1 runs successfully for a day or more, you need to ensure that only the service is immediately
restarted upon failure.
If, after this failure, Service1 does not run successfully for another day, you must ensure the entire server
is immediately restarted.
Which three actions should you perform? (Each correct answer presents part of the solution.Choose
three.)
A.Configure the Reset fail count after value for Service1 to 1 day.
B.Configure the Restart service after value for Service1 to 1,440 minutes.
C.Configure the response to the first failure to be to restart Service1.
D.Configure the response to the first failure to be to restart Server1.
E.Configure the response to the second failure to be to restart Service1.
F.Configure the response to the second failure to be to restart Server1.
Answer: FCA
Microsoft 070-291 070-291시험문제 070-291자료 070-291
NO.19 131.107.12.0/23
NO.20 You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003. All client computers run Windows XP Professional.
You install Windows Server Update Services (WSUS) on a network server named Server1. When you
attempt to synchronize Server1 with the Windows Update servers, you receive an error message.You
open Internet Explorer and verify that you can communicate with an external Web site by using the proxy
server.
You need to ensure that Server1 can communicate with the Windows Update servers.
What should you do on Server1?
A.Restart the IIS administration tool.
B.Configure the Internet Explorer settings to bypass the proxy server.
C.In the WSUS options, configure authentication to the proxy server.
D.Install the ISA Firewall Client.
Answer: C
Microsoft자료 070-291 070-291 070-291자료 070-291덤프
ITexamdump의 CV0-001덤프의 VCE테스트프로그램과 HP2-N35덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 EX0-101시험에 대비한 고품질 덤프와 1Z1-536시험 최신버전덤프를 제공해드립니다. 최고품질 IIA-CIA-Part3시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기