ITExamDump에는SASInstitute A00-201인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. ITExamDump인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.
ITExamDump전문가들은SASInstitute A00-201인증시험만을 위한 특별학습가이드를 만들었습니다.SASInstitute A00-201인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게SASInstitute A00-201인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다
영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인SASInstitute인증 A00-201시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. SASInstitute인증 A00-201시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의SASInstitute인증 A00-201덤프는 SASInstitute인증 A00-201시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.
ITExamDump의 SASInstitute인증 A00-201덤프를 선택하여SASInstitute인증 A00-201시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고SASInstitute인증 A00-201시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. SASInstitute인증 A00-201덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
그렇게 많은 IT인증덤프공부자료를 제공하는 사이트중ITExamDump의 인지도가 제일 높은 원인은 무엇일가요?그건ITExamDump의 제품이 가장 좋다는 것을 의미합니다. ITExamDump에서 제공해드리는 SASInstitute인증 A00-201덤프공부자료는SASInstitute인증 A00-201실제시험문제에 초점을 맞추어 시험커버율이 거의 100%입니다. 이 덤프만 공부하시면SASInstitute인증 A00-201시험패스에 자신을 느끼게 됩니다.
시험 번호/코드: A00-201
시험 이름: SASInstitute (SAS base programming exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2013-12-12
A00-201 덤프무료샘플다운로드하기: http://www.itexamdump.com/A00-201.html
NO.1 Which one of the following statements is true regarding the name of a SAS array?
A. It is saved with the data set.
B. It can be used in procedures.
C. It exists only for the duration of the DATA step.
D. It can be the same as the name of a variable in the data set.
Answer: C
SASInstitute인증 A00-201 A00-201 A00-201 dump A00-201최신덤프
NO.2 The following SAS program is submitted:
data work.total;
set work.salary(keep = department wagerate);
by department;
if first.department then payroll = 0;
payroll + wagerate;
if last.department;
run;
The SAS data set WORK.SALARY, currently ordered by DEPARTMENT, contains 100 observations for
each of 5 departments.
Which one of the following represents how many observations the WORK.TOTAL data set contains?
A. 5
B. 20
C. 100
D. 500
Answer: A
SASInstitute dump A00-201 A00-201 A00-201
NO.3 A raw data record is shown below:
07.an2002
Which one of the following informats would read this value and store it as a SAS date value?
A. date9.
B. ddmonyy9.
C. ddMMMyy9.
D. ddmmmyyyy9.
Answer: A
SASInstitute A00-201 A00-201 A00-201자료
NO.4 Which one of the following is true when SAS encounters a data error in a DATA step?
A. The DATA step stops executing at the point of the error, and no SAS data set is created.
B. A note is written to the SAS log explaining the error, and the DATA step continues to execute.
C. A note appears in the SAS log that the incorrect data record was saved to a separate SAS file for
further examination.
D. The DATA step stops executing at the point of the error, and the resulting DATA set contains
observations up to that point.
Answer: B
SASInstitute dumps A00-201 A00-201 A00-201
NO.5 The following SAS program is submitted:
libname rawdata1 'location of SAS data library';
filename rawdata2 'location of raw data file';
data work.testdata;
infile <insert item here>;
input sales1 sales2;
run;
Which one of the following is needed to complete the program correctly?
A. rawdata1
B. rawdata2
C. 'rawdata1'
D. 'rawdata2'
Answer: B
SASInstitute덤프 A00-201 dump A00-201 A00-201
NO.6 The following SAS DATA step is submitted:
libname temp 'SAS-data-library';
data temp.report;
set sasuser.houses;
newvar = price * 1.04;
run;
Which one of the following statements is true regarding the program above?
A. The program is reading from a temporary data set and writing to a temporary data set.
B. The program is reading from a temporary data set and writing to a permanent data set.
C. The program is reading from a permanent data set and writing to a temporary data set.
D. The program is reading from a permanent data set and writing to a permanent data set.
Answer: D
SASInstitute최신덤프 A00-201 A00-201 A00-201 A00-201
NO.7 The following SAS program is submitted:
data work.staff;
JobCategory = 'FA';
JobLevel = '1';
JobCategory = JobCategory || JobLevel;
run;
Which one of the following is the value of the variable JOBCATEGORY in the output data set?
A. FA
B. FA1
C. FA 1
D. ' ' (missing character value)
Answer: A
SASInstitute기출문제 A00-201 A00-201 pdf A00-201자료 A00-201 A00-201 dumps
NO.8 The following SAS program is submitted and reads 100 records from a raw data file:
data work.total;
infile 'file-specification' end = eof;
input name $ salary;
totsal + salary;
<insert IF statement here>
run;
Which one of the following IF statements writes the last observation to the output data set?
A. if end = 0;
B. if eof = 0;
C. if end = 1;
D. if eof = 1;
Answer: D
SASInstitute A00-201 A00-201 pdf A00-201 dump A00-201자료
NO.9 The contents of the raw data file CALENDAR are listed below:
----|----10---|----20---|----30
01012000
The following SAS program is submitted:
data test;
infile 'calendar';
input @1 date mmddyy10.;
if date = '01012000'd then event = 'January 1st';
run;
Which one of the following is the value of the EVENT variable?
A. 01012000
B. January 1st
C. . (missing numeric value)
D. The value can not be determined as the program fails to execute due to errors.
Answer: D
SASInstitute인증 A00-201인증 A00-201 A00-201 dump
NO.10 The following SAS program is submitted:
data work.retail;
cost = '20000';
total = .10 * cost;
run;
Which one of the following is the value of the variable TOTAL in the output data set?
A. 2000
B. '2000'
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: A
SASInstitute기출문제 A00-201 A00-201
NO.11 The following SAS program is submitted:
data work.month;
date = put('13mar2000'd,ddmmyy10.);
run;
Which one of the following represents the type and length of the variable DATE in the output data set?
A. numeric, 8 bytes
B. numeric, 10 bytes
C. character, 8 bytes
D. character, 10 bytes
Answer: D
SASInstitute기출문제 A00-201 dumps A00-201
NO.12 The SAS data set named WORK.TEST is listed below:
Which one of the following SAS programs created this data set?
A. data work.test;
capacity = 150;
if 100 le capacity le 200 then
airplanetype = 'Large' and staff = 10;
else airplanetype = 'Small' and staff = 5;
run;
B. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
end;
else
do;
airplanetype = 'Small';
staff = 5;
end;
run;
C. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
else
do;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
end;
run;
D. data work.test;D.data work.test;
capacity = 150;
if 100 le capacity le 200 then;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
else;
airplanetype = 'Large'; airplanetype = 'Large';
staff = 10;
run;
Answer: B
SASInstitute덤프 A00-201 pdf A00-201 A00-201최신덤프 A00-201시험문제
NO.13 The following SAS program is submitted:
data work.flights;
destination = 'CPH';
select(destination);
when('LHR') city = 'London';
when('CPH') city = 'Copenhagen';
otherwise;
end;
run;
Which one of the following is the value of the CITY variable?
A. London
B. Copenh
C. Copenhagen
D. ' ' (missing character value)
Answer: B
SASInstitute최신덤프 A00-201덤프 A00-201최신덤프 A00-201 dumps
NO.14 The contents of two SAS data sets named EMPLOYEE and SALARY are listed below:
The following SAS program is submitted:
data work.empsalary;
merge work.employee (in = inemp)
work.salary (in = insal);
by name;
if inemp and insal;
run;
How many observations will the data set WORK.EMPSALARY contain?
A. 2
B. 4
C. 5
D. 6
Answer: B
SASInstitute pdf A00-201 A00-201인증 A00-201 dump
NO.15 A raw data record is listed below:
----|----10---|----20---|----30
Printing 750
The following SAS program is submitted:
data bonus;
infile 'file-specification';
input dept $ 1 - 11 number 13 - 15;
<insert code here>
run;
Which one of the following SAS statements completes the program and results in a value of 'Printing750'
for the DEPARTMENT variable?
A. department = trim(dept) || number;
B. department = dept || input(number,3.);
C. department = trim(dept) || put(number,3.);
D. department = input(dept,11.) || input(number,3.);
Answer: C
SASInstitute기출문제 A00-201 A00-201
NO.16 The following SAS program is submitted:
proc means data = sasuser.houses std mean max;
var sqfeet; run;
Which one of the following is needed to display the standard deviation with only two decimal places?
A. Add the option MAXDEC = 2 to the MEANS procedure statement.
B. Add the statement MAXDEC = 7.2; in the MEANS procedure step.
C. Add the statement FORMAT STD 7.2; in the MEANS procedure step.
D. Add the option FORMAT = 7.2 option to the MEANS procedure statement.
Answer: A
SASInstitute A00-201 A00-201 A00-201 dump A00-201자격증 A00-201
NO.17 Click the Exhibit button to view a listing of the SASUSER.HOUSES data set.
The following SAS program is submitted:
proc report data = sasuser.houses nowd headline;
column style price;
where price lt 100000;
<insert DEFINE statement here>
define price / mean width = 9;
title;
run;
The following ouput is created by the REPORT procedure:
Which one of the following DEFINE statements completes the above program and produces the above
output?
A. define style / order width = 9;
B. define style / group width = 9;
C. define style / across width = 9;
D. define style / display width = 9;
Answer: B
SASInstitute인증 A00-201인증 A00-201 A00-201
NO.18 The following SAS SORT procedure step generates an output data set:
proc sort data = sasuser.houses out = report;
by style;
run;
In which library is the output data set stored?
A. WORK
B. REPORT
C. HOUSES
D. SASUSER
Answer: A
SASInstitute A00-201 pdf A00-201 dumps A00-201인증
NO.19 The contents of the raw data file FURNITURE are listed below:
----|----10---|----20---|----30
chair,,table
chair,couch,table
The following SAS program is submitted:
data stock;
infile 'furniture' dsd;
input item1 $ item2 $ item3 $;
run;
Which one of the following is the value of the variable named ITEM2 in the first observation of the output
data set?
A. table
B. ,table
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: D
SASInstitute A00-201기출문제 A00-201
NO.20 The following SAS program is submitted:
libname sasdata 'SAS-data-library';
data test;
set sasdata.chemists;
if jobcode = 'chem3'
then description = 'Senior Chemist';
else description = 'Unknown';
run;
A value for the variable JOBCODE is listed below:
JOBCODE
CHEM3
Which one of the following values does the variable DESCRIPTION contain?
A. chem3
B. Unknown
C. Senior Chemist
D. ' ' (missing character value)
Answer: B
SASInstitute A00-201 dump A00-201덤프 A00-201 A00-201
ITexamdump의 C-TSCM62-65덤프의 VCE테스트프로그램과 156-215.13덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 3107시험에 대비한 고품질 덤프와 HP0-S33시험 최신버전덤프를 제공해드립니다. 최고품질 IIA-CFSA시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기