HP인증HP0-J66시험의자격증은 여러분에 많은 도움이 되리라 믿습니다. 하시는 일에서 한층 더 업그레이드될 것이고 생활에서도 분명히 많은 도움이 될 것입니다. 자격증취득 즉 재산을 얻었죠.HP인증HP0-J66시험은 여러분이 it지식테스트시험입니다. ITExamDump에서는 여러분의 편리를 위하여 ITExamDump만의 최고의 최신의HP HP0-J66덤프를 추천합니다. ITExamDump를 선택은 여러분이 최고의 선택입니다. ITExamDump는 제일 전면적인HP HP0-J66인증시험자료의 문제와 답을 가지고 잇습니다.
ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITExamDump 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITExamDump 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.
많은 분들은HP HP0-J66인증시험이 아주 어려운 것은 알고 있습니다. 하지만 우리ITExamDump를 선택함으로HP HP0-J66인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Tes의HP HP0-J66합습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다. 우리의 서비스는HP HP0-J66구매 후 최신버전이 업데이트 시 최신문제와 답을 모두 무료로 제공합니다.
시험 번호/코드: HP0-J66
시험 이름: HP (HP Storage Migration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2013-12-16
꿈을 안고 사는 인생이 멋진 인생입니다. 고객님의 최근의 꿈은 승진이나 연봉인상이 아닐가 싶습니다. HP인증 HP0-J66시험은 IT인증시험중 가장 인기있는 국제승인 자격증을 취득하는데서의 필수시험과목입니다.그만큼 시험문제가 어려워 시험도전할 용기가 없다구요? 이제 이런 걱정은 버리셔도 됩니다. ITExamDump의 HP인증 HP0-J66덤프는HP인증 HP0-J66시험에 대비한 공부자료로서 시험적중율 100%입니다.
HP인증 HP0-J66시험은 IT인증시험중 가장 인기있는 시험입니다. HP인증 HP0-J66시험패스는 모든 IT인사들의 로망입니다. ITExamDump의 완벽한 HP인증 HP0-J66덤프로 시험준비하여 고득점으로 자격증을 따보세요.
ITExamDump의 HP인증 HP0-J66시험덤프는 고객님의 IT자격증을 취득하는 꿈을 실현시켜 드리는 시험패스의 지름길입니다. HP인증 HP0-J66덤프에는 실제시험문제의 거의 모든 문제를 적중하고 습니다. ITExamDump의 HP인증 HP0-J66덤프가 있으면 시험패스가 한결 간편해집니다.
우리사이트가 다른 덤프사이트보다 우수한 점은 바로 자료들이 모두 전면적이고 적중률과 정확입니다. 때문에 우리ITExamDump를 선택함으로HP인증HP0-J66시험준비에는 최고의 자료입니다. 여러분이 성공을 위한 최고의 자료입니다.
HP0-J66 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-J66.html
NO.1 A customer with multiple HP 3PAR P10000 Storage Systems needs to move data between the
arrays. They need to ensure that the migration will not disrupt their applications, users, or services.
Which storage method should the customer use to achieve this goal?
A. point-in-time copies
B. backups to disk
C. storage federation
D. deduplication
Answer: C
HP HP0-J66자격증 HP0-J66 HP0-J66
Explanation:
Storage federation from HP enables the online non-disruptive movement of storage volumes
between arrays in a metro area. Unlike external storage virtualization appliances that add cost,
complexity and downtime, storage federation from HP creates a persistent pool of capacity using
native communication between system controllers.
NO.2 A customer needs to be able to recover their data in the event of a site failure.
They have a strict recovery point objective for their business-critical applications.
Which technique should the customer use?
A. snapshots
B. backups to tape
C. backups to disk
D. remote replication
Answer: D
HP기출문제 HP0-J66 HP0-J66 HP0-J66 dump
Explanation:
Need replication to get the data to a backup site.
Note:
*Recovery Point Objective (RPO) refers to the required point-in-time to which a DR solution
canrestore the state of data for a particular service, for example, how much data loss is
acceptablefollowing a disaster. These requirements can range from "close to zero" data loss (for
high-valuefinancial transactions, for example) to some small number of minutes of the most recent
NO.3 A customer is planning to migrate their master database to a remote location. Their network
uses GbE for FCIP tunneling. Which Fibre Channel switch port interface must they use?
A. EX_Port
B. E_Port
C. VEX_Port
D. VE_Port
Answer: D
HP HP0-J66 HP0-J66시험문제 HP0-J66자격증 HP0-J66 HP0-J66 dumps
Explanation:
*VE_Port-Virtual E_Port used with a GbE port for FCIP tunneling
*You can configure a Fibre Channel port as an F_Port, FL_Port, E_Port, or EX_Port (Fibre Channel
routing),and configure a GbE port as a VE_Port (FCIP) or VEX_Port (FCIP with Fibre Channel routing).
NO.4 As part of an upgrade of their existing infrastructure, a customer is considering replacing their
Fibre Channel host bus adapters (HBAs) and Ethernet converged network adapters (CNAs).
How can they expect to improve efficiency through this upgrade?
A. 3:1 port consolidation
B. path failover redundancy
C. greater aggregate throughput
D. cable reduction up to 75%
Answer: A
HP HP0-J66기출문제 HP0-J66최신덤프 HP0-J66 pdf
Explanation:
The HP Dual Port Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet,
iSCSI, and Fibre Channel (FC) connectivity over 10GbE using both Fibre Channel over Ethernet (FCoE)
and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre
Channel onto a converged network adapter, HP CNAs reduce the number of separate adapters and
cables required for your datacenter and also reduce operational, power and cooling costs while
preserving existing Ethernet and Fibre Channel infrastructure.
NO.5 Your customer has an existing HP StoreServ 7400 with four controllers. The array has only SSD
drives installed. What should you consider when sizing a solution which includes Adaptive
Optimization?
A. Ensure that 3% of the capacity and 30% of the performance can be delivered by the SAS disks.
B. Include SAS 10/15K disks in the configuration.
C. Add SSDs or nearline disks to a single node pair.
D. Size the nearline tier for 30% of the performance requirement.
Answer: B
HP HP0-J66 dump HP0-J66 dump HP0-J66 HP0-J66 dump
Explanation:
Note:
*SAS stands for Serial Attached SCSI. Basically, a SAS drive utilizes the same form factor as a
SATA drive but has several high performance advantages. First of all, there's the platter speed.
While typical SATA drives operate at 7200RPM, a SAS drive operates at 10K or 15K. Although the
platter speed is double that of SATA, the MTBF (Mean Time Before Failure) remains at the
industry standard of 1.2 million hours.
*Make sure to define tier 0 to be on a higher performance level than tier 1, which in turn should be
higher performance than tier 2. For example, you may choose RAID 1 with SSDs for tier 0, RAID 5
with FC drives for tier 1 and RAID 6 with NL or SATA drives for tier 2.
*Best practices encourage you to begin your Adaptive Optimization configurations with your
application CPG starting with tier 1. For example, tier 1 could be CPG using your FC or SAS physical
disks. This allows you to add both higher and lower tier capabilities at a later date. If you don't have
higher or lower tier, you can add either or both at a later date by using a new CPG, such as tier 0
using SSDs or tier 2 using NL. Or, you could have CPG tiers with RAID 1 or RAID 5 and RAID 6. The
main point is that you should begin with middle CPG tier 1 when configuring Adaptive Optimization
with your application.
* Example: HP 3PAR Adaptive Optimization moved ~33 percent of the IOPS workload to the SSD
drives even though that involved moving only 1 percent of the space. Performance improved in two
ways: the 33 percent of the IOPS that were serviced by SSD drives got very good latencies (~2 ms),
and the latencies for the NL drives also improved (from ~40 ms to ~15 ms). Moreover, the
investment in the 16 SSD drives permitted them to add even more NL drives in the future, because
the SSD drives have both space and performance headroom remaining.
Reference;Adaptive Optimization for HP 3PAR StoreServ Storage
NO.6 A customer needs to migrate data to a new database environment. They need to make a
physical copy of their data that can be presented to the new environment with the highest level of
availability. Which form of replication should the customer use?
A. backups to disk
B. snapshots
C. clones
D. asynchronous replication
Answer: C
HP pdf HP0-J66 pdf HP0-J66 HP0-J66
Explanation:
Incorrect: Not B:A storage snapshot is a set of reference markers, or pointers, to data stored on a
disk drive, on a tape, or in a storage area network (SAN). A snapshot is something like a detailed
table of contents, but it is treated by the computer as a complete data backup. Snapshots
streamline access to stored data and can speed up the process of data recovery. There are two main
types of storage snapshot, called the copy-on-write (or low-capacity) snapshot and the split-mirror
snapshot. Utilities are available that can automatically generate either type.
9. A customer needs to replicate data from a remote location to an HP StoreOnce B6200 Backup.
A. The HP D2D sizing tool should be usedto size link speed and understand concurrency restraints.
B. Concurrency control should be used if the replication isnot run at the same times as backups and
housekeeping jobs.
C. Separate replication jobs should be created for each datatype.
D. Backups and housekeeping jobs should berun in thereplication window.
Answer: A
HP자료 HP0-J66 HP0-J66 HP0-J66
Explanation:
The replication best practices that apply to HP StoreOnce D2D Backup Systems are
equally as valid for the HP B6200 StoreOnce Backup System.
Best practices include:
*Use the Sizing tool to size replication link speed and understand replication concurrency
restraints.
Reference; HP B6200 Backup System, Recommended Configuration Guidelines
10. In which HP rack is the factory Integration of an HP StoreServ 7000 supported?
A. HP 5642 rack
B. HP G3 rack
C. HP 10000 rack
D. HPV142 rack
Answer: C
HP인증 HP0-J66덤프 HP0-J66 HP0-J66 HP0-J66시험문제
Explanation:
Choose Racking Options The HP 3PAR StoreServ 7000 is compatible with most industry standard
4-post EIA 19 inch racks with square mounting holes, including the HP Intelligent Series Rack and
the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7000 can be factory configured and shipped in
a rack or shipped without a rack for field integration into an existing rack. The rack used for factory
integration is the HP Intelligent Series Rack.
NO.7 What are the benefits of migrating to an HP 3PAR StoreServ 7000?
A. Virtualizationof homogenous storage devices
B. increased efficiency through reduced capacity requirements
C. multi-tier storage availability in hyperscale enterprise platform
D. federated non-disruptive data mobility between third-party systems
Answer: D
HP인증 HP0-J66 HP0-J66 HP0-J66 pdf HP0-J66
Explanation:
HP 3PAR StoreServ 7000 Storageisthe only platform that offers the performance required to double
virtual machine (VM) density on your physical servers-guaranteed.
Store all of your data on a single system that supports advanced features such as storage federation
and automated tiering and enables you to start small and grow without disruption.
NO.8 A customer is planning to migrate from an HP EVA to an HP 3PAR StoreServ 7000 Storage
System The customer uses disk groups on the EVA for fine-grained database management.
What can the customer use to achieve fine-grained database management on the HP 3PAR
StoreServ 7000?
A. logical volumes
B. common provisioning groups
C. disk groups
D. virtual volumes
Answer: B
HP HP0-J66 HP0-J66최신덤프 HP0-J66 HP0-J66
Explanation:
Terminology comparison between EVA and HP 3PAR StoreServ EVA P6000:Disk Group HP 3PAR
StoreServ:Common Provisioning Group (CPG)
ITexamdump의 VCP510PSE덤프의 VCE테스트프로그램과 700-410덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP5-K01D시험에 대비한 고품질 덤프와 HP0-J61시험 최신버전덤프를 제공해드립니다. 최고품질 EN0-001시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기