HP 자격증 HP0-S32 시험문제와 답

성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. HP인증 HP0-S32시험이 영어로 출제되어 시험패스가 너무 어렵다 혹은 회사다니느라 공부할 시간이 없다는 등등은 모두 공부하기싫은 구실에 불과합니다. ITExamDump의 HP인증 HP0-S32덤프만 마련하면 실패를 성공으로 바꿀수 있는 기적을 체험할수 있습니다.제일 간단한 방법으로 가장 어려운 문제를 해결해드리는것이ITExamDump의 취지입니다.

IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. HP인증 HP0-S32시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의HP인증 HP0-S32덤프로 자격증을 편하게 취득하는게 어떨가요?

ITExamDump의 HP인증 HP0-S32시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 HP인증 HP0-S32덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. HP인증 HP0-S32시험을 통과하여 자격증을 취득하려면ITExamDump의 HP인증 HP0-S32덤프로 시험준비공부를 하세요.

HP인증 HP0-S32시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 HP인증 HP0-S32덤프는HP인증 HP0-S32시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.

만약 아직도HP HP0-S32시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 ITExamDump에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와HP HP0-S32인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약HP HP0-S32인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리ITExamDump선택을 후회하지 않을 것입니다, 우리ITExamDump과의 만남으로 여러분은 한번에 아주 간편하게HP HP0-S32시험을 패스하실 수 있으며,HP HP0-S32자격증으로 완벽한 스펙을 쌓으실 수 있습니다,

시험 번호/코드: HP0-S32

시험 이름: HP (HP BladeSystem Networking 2011)

ITExamDump선택으로HP HP0-S32시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서HP HP0-S32관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는HP HP0-S32덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.

ITExamDump덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. ITExamDump제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. ITExamDump의HP인증 HP0-S32덤프는 이해하기 쉽고 모든HP인증 HP0-S32시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.

HP0-S32 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-S32.html

NO.1 What is considered a trunk in a Cisco switching environment?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: B

HP   HP0-S32   HP0-S32   HP0-S32자격증   HP0-S32시험문제

NO.2 What are the requirements for link aggregation using LACP? (Select three.)
A. Links must have the same tagged VLANs assigned.
B. Links must be the same speed.
C. Links must use the same media type.
D. Links must share a boundary.
E. Links must be full-duplex.
F. Links must be fiber connections.
Answer: B, D, E

HP dump   HP0-S32 dump   HP0-S32덤프

NO.3 Which tasks are used to define a vNet for Virtual Connect Ethernet? (Select three.)
A. Assign only one network per server NIC.
B. Assign one or multiple networks per server NIC.
C. Optionally set the native VLAN.
D. Define the server profile.
E. Specify VLAN names/IDs.
F. Select unassigned uplinks.
Answer: A, D, F

HP   HP0-S32시험문제   HP0-S32   HP0-S32덤프   HP0-S32

NO.4 In a switching environment with redundant links, which technology is required for proper operation?
A. VLANs
B. Cisco vPC
C. loop prevention
D. dynamic routing
Answer: C

HP인증   HP0-S32 dump   HP0-S32기출문제

NO.5 Which spanning tree protocol is the most appropriate in a VLAN-aware, non-proprietary network
implementation?
A. RSTP
B. PVST+
C. MSTP
D. STP
Answer: C

HP   HP0-S32   HP0-S32최신덤프   HP0-S32 pdf

NO.6 The IEEE 802.1AX (802.3ad) Link Aggregation Control Protocol is a Layer 2 protocol. What is its
function?
A. dynamically identifies link speeds regardless of media type
B. forms port trunks consisting of two or more uplink ports
C. identifies the VLAN to which frames transmitted on a link or port trunk belong
D. advertises information that describes and identifies devices
Answer: B

HP   HP0-S32 dumps   HP0-S32최신덤프   HP0-S32

NO.7 Which industry-standard protocols are supported on Virtual Connect Ethernet uplinks? (Select three.)
A. IEEE 802.1 AX (802.3ad) Link Layer Discovery Protocol (LLDP)
B. IEEE 802.1w-2001 Rapid Spanning Tree (RSTP)
C. IEEE 802.1p Quality of Service (QoS)
D. IEEE 802.1 AX (802.3ad) Link Aggregation Protocol
E. IEEE 802.1Q VLAN tagging
F. IEEE 802.3af-2003 Power over Ethernet (PoE)
Answer: A, D, E

HP시험문제   HP0-S32   HP0-S32   HP0-S32

NO.8 How can a tagged packet be processed for QoS when it is received on an inbound interface? (Select
three.)
A. The marked priority level can be changed to enforce predetermined classification levels.
B. The packet can be scheduled for a queue based on the marked 802.1p priority level.
C. The packet can be moved to a more secure VLAN and its priority remarked.
D. The packet can be scheduled for a queue based on a preset policy.
E. The packet can be discarded or rerouted if it does not match a set policy.
F. The packet can be prevented switch traversal for a predetermined penalty period.
Answer: A, B, D

HP   HP0-S32   HP0-S32시험문제   HP0-S32기출문제   HP0-S32 dump

NO.9 What does trunk refer to in industry-standard terminology?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: A

HP기출문제   HP0-S32덤프   HP0-S32자료   HP0-S32

NO.10 What are Virtual Connect Enterprise Manager features? (Select three.)
A. is licensed per enclosure
B. is licensed with the Virtual Connect Ethernet module
C. is embedded on the Virtual Connect Ethernet module
D. can administer up to 256,000 network addresses
E. can manage a single domain of up to four enclosures
F. can administer up to 16,000 servers
Answer: A, D, F

HP   HP0-S32   HP0-S32   HP0-S32

NO.11 What is considered a Virtual Connect domain in Virtual Connect Enterprise Manager?
A. a maximum of 1,000 enclosures
B. a maximum of 16,000 servers
C. from 1 to 4 enclosures
D. 250 Virtual Connect Manager domains
Answer: C

HP자격증   HP0-S32   HP0-S32

NO.12 What is used to achieve Fibre Channel data transfer?
A. channel mesh
B. packets
C. tunnels
D. frames
Answer: D

HP인증   HP0-S32   HP0-S32   HP0-S32시험문제   HP0-S32

NO.13 Which port is the lowest-cost path to the spanning tree root bridge?
A. root port
B. defined root port
C. designated port
D. forwarding port
Answer: A

HP덤프   HP0-S32 pdf   HP0-S32기출문제   HP0-S32덤프

NO.14 On a Cisco switch, what does the portfast setting do?
A. eliminates auto-negotiation delays with 10GbE ports
B. ensures the link is at maximum speed regardless of configuration
C. causes BPDUs to be blocked if sensed
D. eliminates delays inherent in RSTP/MSTP synchronization
Answer: D

HP   HP0-S32덤프   HP0-S32   HP0-S32   HP0-S32

NO.15 What does N_Port ID virtualization do?
A. provides an abstraction layer between the server HBAs and the SAN
B. provides interoperability among third-party SAN device manufacturers
C. provides connectivity between the Virtual Connect module and the Onboard Administrator
D. enables a single HBA port to register multiple, unique WWNs within a fabric
Answer: D

HP기출문제   HP0-S32자료   HP0-S32   HP0-S32   HP0-S32 pdf

NO.16 You are configuring Virtual Connect Flex-10 10Gb Ethernet modules with Flex-10 server adapters.
What is an important network design consideration?
A. The Virtual Connect Flex-10 10Gb Ethernet module does not enforce VLAN isolation between
FlexNICs of the same server LAN on Motherboard (LOM).
B. If the Flex-10 server adapters are implemented as mezzanine cards, the Virtual Connect Flex-10 10Gb
Ethernet module requires all FlexNICs be configured for the same speed.
C. The Virtual Connect Manager will enforce physical port isolation by not allowing FlexNICs of the same
server port to connect to the same Virtual Connect network.
D. LACP trunking is not allowed between Virtual Connect uplink ports and infrastructure switch ports
located on different modules, even if within the same physical switch.
Answer: C

HP   HP0-S32   HP0-S32인증

NO.17 What are valid reasons for implementing VLANs? (Select two.)
A. to segregate traffic by resource or application needs
B. to provide enhanced name resolution
C. to reduce subnet cost options
D. to minimize the effect of broadcast traffic on hosts
E. to support multipathing
Answer: A, D

HP   HP0-S32시험문제   HP0-S32   HP0-S32

NO.18 What are valid FlexNIC bandwidth selections? (Select three.)
A. Preferred
B. Assigned
C. Static
D. Custom
E. Dynamic
F. Auto
Answer: A, D, F

HP자격증   HP0-S32 dumps   HP0-S32 dumps   HP0-S32인증   HP0-S32

NO.19 Which is a unique feature of a virtual switch?
A. port mirroring for packet analysis
B. VLAN segmentation at the port level
C. no packet forwarding (routing) between VLANs
D. maximum of 1016 ports per switch
Answer: D

HP dump   HP0-S32   HP0-S32   HP0-S32

NO.20 Which statements are true about port VLAN memberships? (Select three.)
A. A port can be an untagged member of multiple VLANs.
B. A port must be a member of at least one VLAN.
C. A port must be a tagged member of only one VLAN.
D. A port can be an untagged member of only one VLAN.
E. A port can be a tagged member of multiple VLANs.
F. A port can be a tagged member of one VLAN and an untagged member of multiple VLANs.
Answer: B, D, E

HP시험문제   HP0-S32   HP0-S32

ITExamDump에서는 전문HP HP0-S32인증시험을 겨냥한 덤프 즉 문제와 답을 제공합니다.여러분이 처음HP HP0-S32인증시험준비라면 아주 좋은 덤프입니다. ITExamDump에서 제공되는 덤프는 모두 실제시험과 아주 유사한 덤프들입니다.HP HP0-S32인증시험패스는 보장합니다. 만약 떨어지셨다면 우리는 덤프비용전액을 환불해드립니다.