HP0-M18 덤프 HP 인증

ITExamDump에서 HP인증 HP0-M18덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. HP인증 HP0-M18덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.

HP HP0-M18인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.HP HP0-M18시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는HP HP0-M18관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸HP HP0-M18관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게HP HP0-M18응시하는데 많은 도움이 될 것입니다.

시험 번호/코드: HP0-M18

시험 이름: HP (HP LoadRunner Software)

HP인증 HP0-M18시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은ITExamDump 의 HP인증 HP0-M18덤프를 알고 계시는지요? ITExamDump 의 HP인증 HP0-M18덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.

ITExamDump를 선택함으로, ITExamDump는 여러분HP인증HP0-M18시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.

ITExamDump 에서 출시한 제품 HP인증HP0-M18시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된HP인증HP0-M18덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.

ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.

HP0-M18 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-M18.html

NO.1 You configure a scenario to start with a delay of <05:00:00> (HH:MM:SS) just before leaving from
work. You return the next morning to find that the scenario did not run. Why would this happen?
A. You failed to save the scenario.
B. You failed to save the schedule.
C. You failed to connect to the load generators.
D. You failed to press the START SCENARIO button.
Answer: D

HP인증   HP0-M18   HP0-M18기출문제   HP0-M18자료

NO.2 Click the Exhibit button.
Which type of graph does the image in the exhibit represent?
A. Merged graph
B. Drill Down graph
C. Cross Scenario graph
D. Auto Correlated graph
Answer: C

HP pdf   HP0-M18   HP0-M18   HP0-M18

NO.3 While analyzing the Vuser log files from a scenario run, you see the following log file from one of the
Vusers.
Start auto log message stack - Iteration 1.
Starting action BookFlight.
BookFlight.c(5): Notify: Transaction WT_00_Home_Page started.
BookFlight.c(7): Error -27796: Failed to connect to server 27.0.0.1:1080 [10061]
End auto log message stack.
What was the Run-time setting, Logging option set to?
A. Standard Logging
B. Extended Logging
C. Always send a message
D. Send a message only when an error occurs
Answer: D

HP시험문제   HP0-M18   HP0-M18자격증   HP0-M18   HP0-M18

NO.4 Click the Exhibit button.
What does the image shown in the exhibit represent?
A. Thumbnail
B. Extended Log
C. Content Check
D. Snapshot on Error
Answer: D

HP최신덤프   HP0-M18최신덤프   HP0-M18 dumps   HP0-M18 dumps   HP0-M18

NO.5 What does the elapsed time in the Scenario Status window refer to?
A. the time that has elapsed from when all Vusers have finished Initializing
B. the time that has elapsed from when all Vusers were in the running state
C. the time that has elapsed from when you press the start Scenario button
D. the time that has elapsed from when the first Vusers entered the running state
Answer: C

HP   HP0-M18자격증   HP0-M18   HP0-M18   HP0-M18

NO.6 Which scenario execution run allows you to verify the system performs as expected under load?
A. Debug
B. Full Load
C. Top Time
D. Scalability
Answer: B

HP인증   HP0-M18인증   HP0-M18   HP0-M18

NO.7 After the scenario execution, which LoadRunner component is responsible for collecting and
organizing the performance data?
A. VuGen
B. Analysis
C. Controller
D. load generator
Answer: C

HP pdf   HP0-M18인증   HP0-M18   HP0-M18 pdf   HP0-M18시험문제

NO.8 Which Analysis graph details the delay for the complete path between the source and destination
machines?
A. MS IIS
B. Windows Resource
C. Network Delay Time
D. Time to First Buffer Breakdown
Answer: C

HP덤프   HP0-M18   HP0-M18최신덤프   HP0-M18   HP0-M18   HP0-M18

NO.9 Which option in the Analysis tool allows you to see the results of two graphs from the same load test
scenario in a single graph?
A. Drill Down
B. Apply Filter
C. Merge Graphs
D. Auto Correlate
Answer: C

HP최신덤프   HP0-M18최신덤프   HP0-M18   HP0-M18

NO.10 Where in the Run-time settings can you define to only send messages when an error occurs?
A. General: Log
B. General: Run Logic
C. General: Miscellaneous
D. General: Additional Attributes
Answer:A

HP덤프   HP0-M18   HP0-M18인증   HP0-M18

NO.11 When scheduling by scenario, to which group(s) does the defined schedule apply?
A. all groups in the scenario
B. only the first group in the scenario
C. only the selected group in the scenario
D. only the selected group in the scenario scheduler
Answer:A

HP인증   HP0-M18   HP0-M18자료

NO.12 When you specify to iterate a script 10 times, which sections of the script are iterated?
A. group
B. action
C. vuser_init
D. vuser_end
Answer: B

HP   HP0-M18자료   HP0-M18

NO.13 Which Analysis graph shows the number of transactions against transaction response times?
A. Transactions per Second
B. Average Transaction Response Time
C. Transaction Response Time Under Load
D. Transaction Response Time (distribution)
Answer: D

HP자격증   HP0-M18자격증   HP0-M18최신덤프   HP0-M18   HP0-M18 dumps

NO.14 Where are the results stored during the run of a scenario?
A. Analysis
B. Controller
C. utility server
D. load generator
Answer: D

HP기출문제   HP0-M18   HP0-M18   HP0-M18

NO.15 Which Analysis graph details transaction response times as a function of load?
A. Transactions per Second
B. Average Transaction Response Time
C. Transaction Response Time Under Load
D. Transaction Response Time (distribution)
Answer: C

HP pdf   HP0-M18   HP0-M18   HP0-M18자료   HP0-M18 dump   HP0-M18

NO.16 You are running a test and notice that during the ramp up, the response times are beginning to
drastically increase. How can you instruct LoadRunner to stop ramping up Vusers and hold the current
number?
A. press the STOP button on the Controller's main window
B. press the PAUSE button on the Interactive Schedule graph
C. select the option to wait for the current iteration to end before stopping
D. select the Vusers in the Ready state from the Vusers window and click the STOP button
Answer: B

HP자격증   HP0-M18자료   HP0-M18 pdf   HP0-M18자료

NO.17 During analysis of a scenario, you realize that the throughput becomes flat as Vusers continue to
increase. What is the likely cause?
A. a bandwidth problem
B. a database server problem
C. a web server connection problem
D. an application server connection problem
Answer:A

HP시험문제   HP0-M18기출문제   HP0-M18 dump   HP0-M18

NO.18 In the Analysis tool, what allows you to modify the scale of the x-axis?
A. think time
B. granularity
C. event type
D. transaction hierarchical path
Answer: B

HP   HP0-M18   HP0-M18인증

NO.19 Which option in the Analysis tool allows you to compare a measurement in a graph with other
measurements during a specific time range of a scenario and view similar trends?
A. Drill Down
B. Apply Filter
C. Merge Graphs
D. Auto Correlate
Answer: D

HP   HP0-M18   HP0-M18시험문제   HP0-M18   HP0-M18최신덤프

NO.20 When you define a rendezvous point in a scenario, where should the lr_start_transaction function be
placed?
A. at the end of the action section
B. at the beginning of the action section
C. immediately after the rendezvous function
D. immediately before the rendezvous function
Answer: C

HP   HP0-M18자료   HP0-M18   HP0-M18

ITExamDump의HP인증 HP0-M18덤프는 인터넷에서 검색되는HP인증 HP0-M18시험공부자료중 가장 출중한 시험준비 자료입니다. HP인증 HP0-M18덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.